SENSATION Protein & Blood Stain Carpet Spotter

FEATURES & BENEFITS

– Specialty spotter and pre-spray developed to remove stubborn albumin stains.

– Developed specifically for synthetic fibres providing improved cleaning performance.

– Suitable for use as a traffic lane cleaner for synthetic fibres.

APPLICATION

SPOTTING – Use undiluted.

• Pre-test before use. Apply SENSATION in an inconspicuous area and cover with a clean white towel. Leave for 5 mins and check the towel for colour transfer. If no colour transfers proceed with cleaning.
• Blot as much excess liquid as possible or remove solid soils.
• Using a trigger spray apply SENSATION to the outside edge of the stain. DO NOT oversaturate carpet.
• Work product towards the middle of the stain with a clean white towel. DO NOT spread the stain by scrubbing with a sponge.
• Leave the product to remain on the stain for 2 minutes.
• Using a damp white towel blot the treated area.
• Repeat the process until no more soils come up in the towel.
• Always rinse, neutralise or extract the treated area.
• Repeat above until all stain is removed.

Pre-spray

• Vacuum carpet thoroughly and move furniture or place foil under legs.
• Prepare the pre-spray solution as directed. 1 to 8 parts water
• Pre-spray the carpet to be cleaned paying special attention to high traffic or heavily soiled areas. DO NOT saturate carpet. Make sure carpet is consistently wet.
• Allow pre-spray to remain on the carpet for 3 – 5 minutes. Always work on a manageable area and DO NOT let pre-spray dry.
• Dry scrub with wand to give even application.
• Rinse the treated area with cold water and blot or extract with no chemicals in machine. Always use FOAMEX in the tank.
• Extract the carpet with clean water (do not put chemicals into the tank for this process). The use of FOAMEX in the recovery tank may be required.
• Leave the carpet to dry. If necessary, provide ventilation to speed drying times.